2K STRUKTUUR
- 2-component adhesive based on methyl methacrylate
- For structural bonding and sealing
- Highly resistant to chemicals
- Working time: 4 to 6 minutes
- Dry after 60 minutes
- Sandable after 60 minutes
- Paintable
- Temperature range: -40°C to 135°C (peak +200°C)
This combination does not exist.
| Textual description |
2K Struktuur is a 2-component adhesive with superior adhesion, enhanced vibration resistance, and strong chemical resistance. |
| Use |
Thanks to its structural bonding properties, the resulting tensile and impact test results make this product a market leader in a maximum number of application areas — both for repair and manufacturing. Suitable for a wide range of substrates such as: Stainless steel Carbon steel Aluminum Wood Fiberglass Natural stone Polycarbonate Vinyl ABS Acrylics PVC GRP Polyesters Urethanes |
| Instructions for use |
Sand the surface (mechanically if needed, at low speed). Clean the surface with MTCLEANER for applications on stone, aluminum, etc. For plastic surfaces, clean with PLASTCLEAN. Spray a small amount before attaching the MIXERTIP nozzle (ART. D101000) to ensure a proper mixing ratio. Apply the adhesive close to the contact surface to avoid air bubbles. |
| Scent |
Strong acid |
| Processing time | 4 to 6 minutes |
| Shelf life | 12 months |
| Tensile strength | 24 MPA |
| Shore D harness | 75 |
| Filling | 1 to 4 mm |
| Temperature range | -40°C to +135°C (peak +200°C) |
| Andere info |
Environment & Safety Small cartridge, minimal waste No PU. No training required! |