FAST FITTER

This combination does not exist.

Textual description	Chemical anchor based on polyester resin. Fast curing.

Use	Anchoring in both hollow and solid substrates, filling cracks in concrete or stone, anchoring threaded rods, rebar, hooks, awnings, shutters, boilers, fences, shutters, garage doors, railings, windows, and more...

Instructions for use	Degrease the surface with MTCLEANER and let it dry. Clean thoroughly, making sure it is dust and rust-free. The edges of the hole should be rough for optimal adhesion. Flatten the threaded rods to prevent loosening. Unscrew the cap and cut the top of the mixing bag. Spray with a standard 300 ml gun. For hollow substrates, use a suitable plug first. Do not inject the first 10 cm. Inject from the bottom of the hole up to 2/3 of the volume. Immediately insert the items to be anchored with a rotating motion. Wipe off excess material with a cloth. After use, unscrew the mixertip, clean the cartridge, and reattach the sealing cap to the cartridge. CAUTION: When drilling, ensure that the holes are drilled at least 2 times their depth apart.

Color

Grey/Green

Basis

Unsaturated polyester resin in methyl acrylate ester

Density

1650 kg/m³

Flexural strenght

15 MPa

Tensile strength

9 MPa

Compressive strength

55 MPa

Flexural modulus

3434 MPa

Modulus of elasticity

3032 MPa

Mixing ratio

10 op 1

Processing temperature

+5°C to 25°C

UV resistance

Good

Curing time on:

Loadable at 5°C after 50 minutes Loadable at 15°C after 35 minutes Loadable at 25°C after 30 minutes

Shelf life

6 months

Miscellaneous