MT DEBLOC+
- Creeping oil/Contact spray
- Lubricates
- Displaces moisture, prevents rust and corrosion
- Loosens rusted parts
- Safe for most coatings
- Safe for metals and alloys
- Can be used upside down
- Propellant is non-flammable CO2
This combination does not exist.
| Textual description |
Universal maintenance product for professional use Displaces moisture Loosens rusted or jammed parts Prevents electrical failures Lubricates Starts wet engines Protects metal against rust and humidity |
| Use |
Brake cables, gear systems, chains, wiring, ship installations, locks, hinges, spark plugs, distributors, ignition systems, battery terminals, starters, coils, power tools, switches, machines, nuts, bolts. |
| Instructions for use |
Spray the surfaces generously and allow penetration. For starting wet engines: spray on the connection cables, the terminals, and in the distributor cap. To maintain the coating thickness, the surface should be regularly re-sprayed in damp conditions. |
| Color |
Clear, light amber |
| Falex load test | 930N |
| Flash point | 78°C |
| Density | 0,82 |
| Solidification point | -50°C |
| Layer thickness |
1 to 2 µm (after 24 hours of leveling) |
| Surface tension | 22 mN/m |
| Covering surface | 100 m²/L |
| Water displacement | 70% (IP1 78/61, methode B) |
| Dielectric breakdown voltage | ca 30kV bij 2 µm |
| Film properties after solvent evaporation |
Relative density: 0.88 Dynamic viscosity (at 40°C): 26 mPa.s |
| Andere info |
Environment & Safety Free from free metals Contains no PTFE Press pack based on air pressure (no flammable or harmful gases) Cardboard packaging contains FSC certification |