EASYSOLDER END
- Waterproof Solder Connector
- Connect flexible or solid wires in one single step.
- Solders, insulates, connects, and seals against water and dust.
- The 3 lead-free solder rings ensure a saturated solder joint!!
- Extreme temperature resistance from -60°C to +125°C allows for maximum application possibilities!
- Transparent insulation allows visual inspection.
- No voltage loss.
- Permanently flexible.
| Textual description |
Waterproof end solder connector Green: Conductor diameter: 3.3 mm Red: Conductor diameter: 4.3 mm Blue: Conductor diameter: 5.3 mm Yellow: Conductor diameter: 7.3 mm |
| Use |
| Instructions for use |
Choose the correct diameter. Strip approximately 6 mm of the cable. Slide the EASYSOLDER over the cable and, if necessary, degrease the cable sheath with MEC-ELEC CLEAN. Heat the solder until it activates. Then work toward the outer ends. |
| Dielectric strength | 25 MV/m |
| Breakdown voltage | 600V |
| Volume resistivity | 1×10^17 Ω⋅m |
| Voltage drop | 2 mV |
| IP value | 6 - 7 |
| Shrink temperature |
+300°C |
| Temperature range | -60°C to +125°C |
| Outer layer | Door bestraling kruisverbonden transparant polyolefin |
| Solder ring | Sn 42%, Bi 58% ROM 1 flux |
| Sealing ball | Gekleurd glas |
| Copper spiral | Uit vierkant getrokken koperdraad. Dit verhoogt de mechanische weerstand |
| Sealing gasket | Hoogwaardig warmtesmeltende lijm |
| Andere info |
Milieu & Veiligheid ROHS goedgekeurd |