MT PRIMER 250 ML
- General primer
- Provides better adhesion of polymer sealants and 2-component adhesives on various substrates
- Fixes dust particles on porous substrates
- Prevents porous substrates from absorbing
- Ideal for preparing surfaces for bonding
This combination does not exist.
| Textual description |
Improves adhesion of PU or hybrid sealants and PU 2-component adhesives on various substrates. |
| Use |
Can be applied to: concrete, some plastics, stone, plaster, cement, wood, aluminum (with a fine brush if visible) |
| Instructions for use |
Test color fastness. Clean the surface and make it grease-free (using MTCLEANER). Let it sit for 30 to 60 minutes and apply the adhesive within 4 hours, but not on wet primer. Apply invisibly if yellowing occurs. Not suitable for underwater applications. Also not for PTFE, PE, PP, and bituminous substrates. Avoid inhalation and contact with eyes and skin. Once opened, it has a very limited shelf life. It is recommended to pour a small amount into a separate container and always tightly close the packaging. A well-ventilated area is important during use. |
| Density | 930 kg/m³ |
| Drying time |
Between 30 and 60 minutes |
| Physical form | Liquid |
| Color |
Transparent - light yellow |
| Flash point | 52°C |
| Viscosity | 50 mPa.s |
| UV resistance | Weak |
| Shelf life | 6 months |